Removal and Installation

NOTE:  If the keyless access control unit is replaced, do the keyless access registration . If the original keyless access control unit is installed, confirm that all systems work properly.

1. Gauge Control Module - Remove
2. Keyless Access Control Unit - Remove

   Courtesy of HONDA, U.S.A., INC.

   1. Disconnect the connectors (A). 2. Remove the keyless access control unit (B) with the bracket (C) and under-dash subrelay box (D).

   Courtesy of HONDA, U.S.A., INC.

   3. Remove the keyless access control unit (A) from the bracket (B).

3. All Removed Parts - Install

   1. Install the parts in the reverse order of removal.

4. Keyless Access System - Registration