DTC 2607

DTC 2607  : SXM Diag

NOTE: 

• Check the vehicle 12 volt battery condition first .
• This navigation DTC sets when there is an internal XM receiver problem.
• Before you troubleshoot, make sure to follow the General Troubleshooting Information .
• Check the connectors for poor connections or loose terminals.

1. Problem verification

   -1. Clear the hard error codes .

   -2. Turn the vehicle to the OFF (LOCK) mode then the ON mode.

   -3. Check for hard error codes .

   Is DTC 2607 indicated?

   YES 

   Replace the audio-navigation unit .

   NO 

   Intermittent failure, the system is OK at this time.