LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2021 >> Odyssey EX-L >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Integrated Control Systems - Testing & Troubleshooting >> Connector View >> Power Mirror Control Unit Connector for Inputs and Outputs
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Mirror Control Unit Connector for Inputs and Outputs

Power Mirror Control Unit 24P Connector (female terminals) 

GHH445751Courtesy of HONDA, U.S.A., INC.
Terminal number Terminal name Description Signal
1 IG1 METER IG1 power source With the vehicle in the ON or START mode: about battery voltage
2 R/C MIRR MTR (R-MVCC) Outputs R/C MIRR MTR (R-MVCC) signal When power mirror control unit is wakeup mode: about 5 V
3 DR MIRROR UD Detects DR MIRROR UD signal With the vehicle in the ON mode: about 0 V or 5 V (depending on power mirror switch position)
4 MIRROR L COM Detects MIRROR L COM signal With power mirror selector switch in R position: less than 0.2 V
5 AS MIRROR LR Detects AS MIRROR LR signal With power mirror selector switch in R position: less than 0.2 V
6 MIRROR SEL Detects MIRROR SEL signal With power mirror selector switch in L position: less than 0.2 V
7 R/C MIRROR MTR (R-SGND) Detects R/C MIRROR MTR (R-SGND) signal Less than 0.2 V at all times
8 SEV Detects SEV signal About 0-5 V (depending on power mirror vertical position)
9 SEH Detects SEH signal About 0-5 V (depending on power mirror horizontal position)
10 R/C MIRR MTR (R-UD) Drives right power mirror actuator (UP) With right power mirror actuator tilt UP: about battery voltage With right power mirror actuator tilt DOWN: less than 0.2 V
11 MIRROR L LR Detects MIRROR L LR signal With power mirror selector switch in L position: less than 0.2 V
12 DR MIRROR UD Detects DR MIRROR UD signal With power mirror selector switch in L position: less than 0.2 V
13 +B BACK UP Power source for power mirror control unit About battery voltage at all times
14 Not used --- ---
15 P/W DR MTR SGND Ground for power mirror control unit Less than 0.2 V at all times
16 MIRROR SER Detects MIRROR SER signal With power mirror selector switch in R position: less than 0.2 V
17 AS MIRROR HLSE Detects AS MIRROR HLSE signal About 0-5 V (depending on power mirror horizontal position)
18 R/C MIRR MTR (R-MV) Detects R/C MIRR MTR (R-MV) signal About 0-5 V (depending on power mirror vertical position)
19 MIRROR R LR Drives right power mirror actuator (RIGHT) With right power mirror actuator swing RIGHT: about battery voltage With right power mirror actuator swing LEFT: less than 0.2 V
20 MIRROR R COM Drives right power mirror actuator (DOWN/LEFT) With right power mirror actuator swing RIGHT or tilt UP: less than 0.2 V With right power mirror actuator swing LEFT or tilt DOWN: about battery voltage
21 MH Drives left power mirror actuator (RIGHT) With left power mirror actuator swing RIGHT: about battery voltage With left power mirror actuator swing LEFT: less than 0.2 V
22 DR MIRROR COM Drives left power mirror actuator (UP/LEFT) With left power mirror actuator swing RIGHT or tilt DOWN: less than 0.2 V With left power mirror actuator swing LEFT or tilt UP: about battery voltage
23 MV Drives left power mirror actuator (DOWN) With left power mirror actuator tilt DOWN: about battery voltage With left power mirror actuator tilt UP: less than 0.2 V
24 LIN (P/W) Communication line ---