Door Lock Actuator Test: Test
Front Door
- Front Door Panel - Remove
- Front Door Lock Actuator - Test
Driver's door Front passenger's door
1. Disconnect the connector (A). 2. Check the actuator operation by connecting power and ground according to the table.
NOTE: To prevent damage to the actuator, apply battery voltage only momentarily.3. If the actuator does not operate as specified, the front door lock actuator is faulty; replace the front door latch
(B).
- All Removed Parts - Install
1. Install the parts in the reverse order of removal. Rear Door
- Rear Door Panel - Remove
- Rear Door Lock Actuator - Test
Left and Right Rear Door1. Disconnect the connector (A). 2. Check the actuator operation by connecting power and ground according to the table.
NOTE: To prevent damage to the actuator, apply battery voltage only momentarily.3. If the actuator does not operate as specified, the rear door lock actuator is faulty; replace the rear door latch
(B).
- All Removed Parts - Install
1. Install the parts in the reverse order of removal.