Phase 1
| Condition | Minimum | Maximum |
|---|---|---|
| Soak duration* | 6 hours | - |
| Elapsed time after the vehicle condition is turned to the ON mode | 1 second | - |
| Outside air temperature | 40.0°F (4.4 °C) | - |
| Engine coolant temperature [ECT Sensor]** |
140 °F (60 °C)*1 122 °F (50 °C)*2 |
- |
| Engine coolant temperature (at radiator) after soak* | 40.0°F (4.4 °C) | - |
| Engine coolant temperature (at engine) lowering from after soak to current* | - | 9 °F (5 °C) |
| Engine coolant temperature (at radiator) lowering from after soak to current* | - | 3 °F (2 °C) |
| Fuel tank pressure before EVAP canister vent shut valve closed | -1.3 kPa (-10 mmHg, -0.3 inHg) | - |
| Vehicle speed [VEHICLE SPEED] | 26 mph (41 km/h) | - |
| Drive distance after refueling | 7 miles (10 km) | - |
| 12 volt battery voltage [BATTERY] | 10.5 V | - |
| Total intake air amount | 680 g (23.98 oz) | - |
| Intake air amount | 0.010 g/second (0.00036 oz/second) | - |
| Average fuel level | - | 85 % |
| Purge duty [PCS duty]*** | 20 % | - |
| Fuel feedback | Other than during fuel cut-off operation | |
*1: 6-Speed A/T
*2: 9-Speed A/T
*: Cancels detection if out of condition
**: Condition to start purge
***: With stable purge flow
[ ]: HDS Parameter