A/T Gear Position Indicator Does Not Indicate With The Shift Lever In That Position (6-Speed A/T)
Probable cause(s)
- F-CAN communication line error
- Gauge control module defective
- Transmission range switch defective or out of adjustment
- PCM defective
NOTE:
- Check the F-CAN communication line - Refer to: F-CAN Circuit Troubleshooting(9-Speed A/T) (2016 2017 2018), or F-CAN Circuit Troubleshooting(6-Speed A/T) (2016 2017 2018), or F-CAN Circuit Troubleshooting(9-Speed A/T) (2019 2020 2021), or F-CAN Circuit Troubleshooting(6-Speed A/T) (2019 2020) .
- Check the F-CAN communication line by using the gauge control module self-diagnostic function - Refer to: Gauges Self-Diagnostic Function (2019 2020 2021) or Gauges Self-Diagnostic Function (2016 2017 2018) .
- Check the indicator drive circuit in the gauge control module by using the gauge control module self-diagnostic function - Refer to: Gauges Self-Diagnostic Function (2019 2020 2021) or Gauges Self-Diagnostic Function (2016 2017 2018) .
- Inspect the transmission range switch .