CSS_5V, CSS_SIG2, CSS_GND Circuit Inspection
Test Procedure
- Preparation
-
- -
VSA modulator-control unit 46P connector: disconnected
- -
Clutch pedal stroke sensor 4P connector: disconnected
- -
- Procedure
-
- -
Perform the inspection according to the following table.
- -
| (Disconnected) VSA modulator-control unit 46P connector female terminals | (Disconnected) Clutch pedal stroke sensor 4P connector female terminals |
| IG Mode |
|
|
Normal Conditions | ||
| CSS_5V open wire inspection | OFF | There is less than 1 Ω | |||
| CSS_SIG2 open wire inspection | OFF | There is less than 1 Ω | |||
| CSS_GND open wire inspection | OFF | There is less than 1 Ω | |||
| CSS_5V shorted to ground inspection | OFF | Not shorted | |||
| CSS_SIG2 shorted to ground inspection | OFF | Not shorted | |||
| CSS_GND shorted to power inspection | ON | Not shorted | |||
Results
- If abnormal, there is a problem in the circuit.