Engine Support Hanger Installation: Installation

How to use this service information .

When Removing Oil Pump Chain 

Courtesy of HONDA, U.S.A., INC.

Detailed information, notes, and precautions

When Removing Transmission 

Courtesy of HONDA, U.S.A., INC.

Detailed information, notes, and precautions

When Removing The Oil Pump Chain 

1. Vehicle - Lift
2. Right Front Wheel - Remove
   • Right Front Wheel
3. Engine Undercover - Remove
   • Engine Undercover
4. Front Grille Cover - Remove
   • Front Grille Cover
5. Air Cleaner Housing Assembly - Remove
   • Air Cleaner Housing Assembly
6. Coolant Reservoir - Move
   • Coolant Reservoir
7. Drive Belt Auto-Tensioner - Remove
   • Drive Belt Auto-Tensioner
8. Cylinder Head Cover - Remove
   • Cylinder Head Cover
9. Cam Chain Guide B - Remove
   • Cam Chain Guide B
10. Cam Chain - Remove
    • Cam Chain
11. Alternator - Disconnect

    Courtesy of HONDA, U.S.A., INC.

    • Alternator
12. Engine Support Hanger - Install
    NOTE:

    • Be careful when working around the windshield.
    • Be careful not to damage the hood opener cable when installing the engine support hanger at the front bulkhead.

    1. Remove the front damper caps .

    Courtesy of HONDA, U.S.A., INC.

    2. Install the universal lifting eyelet.

    NOTE: Make sure the universal lifting eyelet does not interfere with the surrounding parts.

    Tool Details 

    Name
    a	Bolt (Commercially Available)

    3. Install the engine support hanger onto the vehicle as shown.

    4. Attach the hook (b) to the slotted hole in the universal lifting eyelet.

    5. Tighten the wing nut (c) by hand to support the engine/transmission.

    When Removing The Transmission 

13. Vehicle - Lift
14. Front Grille Cover - Remove
    • Front Grille Cover
15. Air Cleaner Area Parts - Remove
    • Air Cleaner Area
      1. -

         Air Cleaner Housing Assembly

      2. -

         Air Flow Tube

      3. -

         Powertrain Control Module (PCM)

16. 12 Volt Battery Base Bracket - Remove
    • 12 Volt Battery Base Bracket
17. CVTF Warmer - Remove
    • CVTF Warmer
      NOTE:

      • Do not disconnect the CVTF warmer hoses.
      • Put a plastic bag over the CVTF warmer, then move it to the side.
18. Tube Clamp Stay - Remove
    • Tube Clamp Stay
19. Engine Support Hanger - Install
    NOTE:

    • Be careful when working around the windshield.
    • Be careful not to damage the hood opener cable when installing the engine support hanger at the front bulkhead.

    1. Remove the front damper caps .

    Courtesy of HONDA, U.S.A., INC.

    2. Install the universal lifting eyelet.

    NOTE: Make sure the universal lifting eyelet does not interfere with the surrounding parts.

    Tool Details 

    Name
    a	Spacer (Commercially Available)
    b	Bolt (Commercially Available)

    3. Install the engine support hanger onto the vehicle as shown in illustration.

    4. Attach the hook (c) to the slotted hole in the universal lifting eyelet.

    5. Tighten the wing nut (d) by hand to support the engine/transmission.