System Check
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Honda HR-V, 2021 Honda HR-V, 2020 Honda HR-V, 2019 Honda HR-V, and 2018 Honda HR-V. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The HDS can be used to check the state of the immobilizer key registration and the S-NET line by doing a SYSTEM CHECK.
1. Connect the HDS to the data link connector (DLC) .
NOTE: If the HDS does not communicate with the vehicle, go to the DLC Circuit Troubleshooting
2. The vehicle is turned to the ON mode and follow the prompts to the SYSTEM SELECTION MENU.
3. At SYSTEM SELECTION MENU, enter IMMOBI, then select the IMMOBILIZER SETUP.
4. Do the SYSTEM CHECK If there is a system check number, do the troubleshooting for the item indicated.