DTC Advanced Diagnostics: P0058: General Description
The front secondary heated oxygen sensor (secondary HO2S (Bank 2, Sensor 2)) heater is controlled by the duty signal command from the powertrain control module (PCM) to heat front secondary HO2S (Bank 2, Sensor 2) to an optimal temperature. The output driver circuit in the PCM monitors the voltage level of the SO2HTB2 terminal, and if the voltage level of the SO2HTB2 terminal is OFF (high voltage) despite the PCM outputs ON signal to front secondary HO2S (Bank 2, Sensor 2) or if the PCM detects over current of the front secondary HO2S (Bank 2, Sensor 2) heater circuit while the PCM outputs ON signal to front secondary HO2S (Bank 2, Sensor 2), the PCM detects a malfunction and stores a DTC.
Monitor Execution, Sequence, Duration, DTC Type
| Execution | Continuous |
| Sequence | None |
| Duration | 5 seconds or more |
| DTC Type | Two drive cycles, MIL on |