Repair Procedure

How to use this manual .

Courtesy of HONDA, U.S.A., INC.

: Torque, Nm (lbfft)

: Replace

: Warning/Caution

: Inspection/Adjustment

*: Learning

■: SPL Tool

: Required Removal

Courtesy of HONDA, U.S.A., INC.

: Torque, Nm (lbfft)

: Replace

: Warning/Caution

: Inspection/Adjustment

*: Learning

■: SPL Tool

: Required Removal

1. A.-

   NOTE:  The steering wheel switch garnish and the steering wheel lower garnish can be removed without removing the steering wheel.

   Key Information 

   Do the following before starting your work.

   Remove: 

   • Driver's Airbag

   ? Sub-Procedure 

   Removal 

   • Refer to the figure.

   Courtesy of HONDA, U.S.A., INC.

2. B.-

   Sub-Procedure 

   Removal/Installation 

   • Refer to the figure.

   Courtesy of HONDA, U.S.A., INC.

3. C.-

   NOTICE:  

   If you are replacing the driver's airbag after a deployment, refer to Component Replacement/Inspection After Deployment - Refer to: Airbag and Tensioner Disposal () or SRS Component Replacement/Inspection After Deployment () for a complete list of other parts that must also be replaced.

   Sub-Procedure 

   Courtesy of HONDA, U.S.A., INC.

   Removal 

   • Refer to the figure.
4. D.-

   NOTE:  The audio remote-HFL switch and the ACC combination switch can be removed without removing the steering wheel.

   Key Information 

   Do the following before starting your work.

   Remove: 

   • Driver's Airbag

   Sub-Procedure 

   Courtesy of HONDA, U.S.A., INC.

   Removal 

   • Refer to the figure.