Confirmation Procedure

Operating Condition 

Courtesy of HONDA, U.S.A., INC.

• Start the engine. Hold the engine speed [Engine Speed] at 3,000 rpm without load (in P or N) until the radiator fan comes on.
• Let the engine idle for at least 20 seconds.
• Drive the vehicle at a vehicle speed between 15 - 75 mph (24 - 120 km/h) for at least 20 seconds.
  • When freeze data is stored, drive the vehicle under those conditions instead of Driving Pattern step 3.
  • When you have difficulty duplicating the DTC because of road conditions and traffic situations, repeat the driving pattern several times.
  • Drive the vehicle in this manner only if the traffic regulations and ambient conditions allow.