Confirmation Procedure

Operating Condition 

• Turn the vehicle to the OFF (LOCK) mode, and wait at least 6 hours.
• Start the engine, and let it idle for at least 10 seconds.
  • Do not use an engine block heater because the engine coolant temperature will not stay equal during engine stop.
  • When freeze data or the on-board snapshot is stored, test the vehicle under an ambient temperature close to the intake air temperature in the freeze data or the on-board snapshot.
  • When an ambient temperature extremely changes, malfunction judgment may not execute. Avoid extreme temperature changing condition after or before engine start. (When the vehicle is parked in the garage, open the garage door to introduce outside air; then start the engine.)