DTC Troubleshooting: B1080 (Relay Control Module): Inspection

IG1_FUEL_PUMP Circuit Inspection 

Test Procedure 

• Preparation
  • Body control module connector A (66P): disconnected
• Procedure
  • Perform the inspection according to the following table.

			(Connected) Body control module connector A (66P) female terminals
		IG Mode	Courtesy of HONDA, U.S.A., INC.	Normal Conditions
	IG1_FUEL_PUMP circuit inspection	OFF		12 V battery voltage [circuit type 1]

Results 

• If it is abnormal, there is a problem in the circuit.

  If the power supply inspection of the above table showed abnormally, do the additional Power Supply Inspection , to locate the failure.