Engine Start/Stop Switch Test: Test

How to use this manual .

1. Engine Start/Stop Switch - Test

   Preconditions 

   • Passenger's Dashboard Trim Remove

   Procedure/Specifications 

   • Check the switch according to the table. (Figure 1, 2, and 3)

     NOTICE:  

     • When an LED is located between terminals, check if the LED lights up by connecting power and ground to the LED.
     • Note this important operating characteristic; diode bias causes a diode to fully conduct electricity in one direction (forward), while not at all in the opposite direction (reverse).

   Figure 1 

   Courtesy of HONDA, U.S.A., INC.

   Switch (Figure 2) 

   Courtesy of HONDA, U.S.A., INC.

   LF Antenna (Figure 3) 

   Courtesy of HONDA, U.S.A., INC.

   Result 

   Switch or LF Antenna 

   • If the result is not as specified, replace the engine start/stop switch .