Repair Procedure

How to use this manual .

Courtesy of HONDA, U.S.A., INC.

: Torque, Nm (lbfft)

: Replace

: Warning/Caution

: Inspection/Adjustment

*: Learning

■: SPL Tool

: Required Removal

1. A.-

   Sub-Procedure 

   Courtesy of HONDA, U.S.A., INC.

   Installation 

   Lubricant Specifications 

   Object	Type
   O-Ring	Transfer Assembly Fluid

   Tightening Procedure 

   Step	Operation	Specification
   1	Temporarily Tighten	10 Nm (7 lbfft)
   2	Angle Tighten	a	22°

2. B.-

   Sub-Procedure 

   Courtesy of HONDA, U.S.A., INC.

   Installation 

   Lubricant Specifications 

   Position	Type
   a	Transfer Assembly Fluid

   Specifications 

   Specification
   b	Flush with Housing

   NOTICE:  

   Install the oil seal until the oil seal driver (c) has been fully seated.