LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> Electrical >> Starter >> Starters >> Removal & Installation >> Battery Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the battery insulator, if necessary.
  2. Install the battery.
  3. Install the battery hold down retainer and bolt. Tighten the battery hold down retainer bolt to 25 N.m (18 lb ft).
  4. Connect the positive battery cable. Tighten the positive battery cable bolt to 17 N.m (13 lb ft).
  5. Connect the negative battery cable. Refer to BATTERY NEGATIVE CABLE DISCONNECT/CONNECT PROCEDURE (SINGLE BATTERY) .
scientia non olet · About LEMON Manuals