LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 275 (Engine Control System) >> Heated Oxygen Sensor (Ho2S) Removal/Installation >> Wiring Harness Bracket Installation Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Wiring Harness Bracket Installation Note

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • There might be no pin. If there is no pin, lock the wiring harness bracket against rotation and tighten the nut.
    Fig 1: Locating Wiring Harness Bracket & Pin
    G00972631Courtesy of MAZDA MOTORS CORP.