Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Ambient Light Sensor & I/P Top Cover

Courtesy of GENERAL MOTORS CORP.

Install the ambient light sensor to the underside of the I/P top cover, turning it 1/4 turn to secure it in place.

Fig 2: Electrical Connector & Ambient Light Sensor

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector to the ambient light sensor on the underside of the I/P top trim panel.

Fig 3: I/P Top Cover

Courtesy of GENERAL MOTORS CORP.

Install the I/P top cover to the I/P. Refer toTrim Pad Replacement - Instrument Panel (I/P) Upper in Instrument Panel, Gauges, and Console.