Removal Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: I/P Top Cover

Courtesy of GENERAL MOTORS CORP.

Remove the instrument panel top cover. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper in Instrument Panel, Gauges, and Console.

Fig 2: Electrical Connector & Ambient Light Sensor

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connector to the ambient light sensor on the underside of the I/P upper trim panel.

Fig 3: Ambient Light Sensor & I/P Top Cover

Courtesy of GENERAL MOTORS CORP.

Turn the ambient light sensor 1/4 turn and remove it from the I/P top cover.