Installation Procedure
WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
- Align the radio with the center stack and mounting holes.
- Connect the electrical connectors and the antenna connectors from the rear of the radio.
- Install the bolts that hold the radio to the instrument panel center stack.
- Align the trim panel instrument panel center to instrument panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center in Instrument Panel, Gauges and Console.
- Align and move the forward center console in place with the center console bracket. Refer to Console Replacement in Instrument Panel, Gauges and Console.
- Perform the radio setup, if equipped with UM8 - Refer to Radio Setup (With RPO UM8) . For all other audio system configuration, refer to Service Programming System (SPS) in Programming for setup.