LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 582 (Seat System) >> Repair Instructions >> Lumbar Switch Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the lumbar switch to the power seat switch bezel.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the lumbar switch screws.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

    3. Fig 1: Lumbar Switch
    GM409526Courtesy of GENERAL MOTORS CORP.
  3. Install the power seat switch bezel (1) to the seat. Refer to Seat Switch Bezel Replacement .
scientia non olet · About LEMON Manuals