LEMON Manuals
: Even more car manuals for everyone: 1960-2025
Home
>>
Hummer
>>
2003
>>
H2
>>
Repair and Diagnosis
>>
External Pages
>>
Different car
>>
Section 602 (Hydraulic Brake System)
>>
Repair Instructions
>>
Master Cylinder Fluid Level Sensor Replacement
>>
Installation Procedure
April 5, 2026:
LEMON Manuals is launched!
Read the announcement.
Installation Procedure
WARNING:
This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Master Cylinder Fluid Level Sensor
Courtesy of GENERAL MOTORS CORP.
Install the fluid level sensor until the locking tabs snap into place.
Connect the electrical connector to the fluid level sensor.