LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> Steering >> Manual Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Flow Control Valve Replacement - Off Vehicle (Regular) >> Disassembly Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Disassembly Procedure

    Fig 1: Installing Control Valve Assembly
    GM431058Courtesy of GENERAL MOTORS CORP.
  1. Drain the oil from the reservoir (1).
  2. Remove the control valve assembly (3) from the pump housing (1). Make sure the flow control spring (4) does not fall out of the pump housing (1).
  3. Remove the rectangular section seal (2) from the control valve assembly (3).
scientia non olet · About LEMON Manuals