LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> Steering >> Steering Linkage (Non-Rack & Pinion) >> Repair Instructions >> Idler Arm Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

NOTE: Do not attempt to free the ball stud by using a pickle fork or wedge type tool, because seal or bushing damage could result. Use the proper tool to separate all ball joints.
  1. Raise the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  2. Remove the engine protection shield. Refer to ENGINE PROTECTION SHIELD REPLACEMENT .
  3. Remove the idler arm ball stud nut.

    Do not reuse the idler arm ball stud nut.

  4. Remove the idler arm from the relay rod using the J 24319-B  . See Special Tools .
    5. Fig 1: View Of Idler Arm
    GM793272Courtesy of GENERAL MOTORS CORP.
  5. Remove the idler arm frame bolts and the nuts.
  6. Remove the idler arm from the vehicle.
scientia non olet · About LEMON Manuals