LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2006 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Body & Frame >> Windows >> Stationary Windows >> Repair Instructions >> Inside Rearview Mirror Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Electrical Connector & Rearview Mirror
    GM1453822Courtesy of GENERAL MOTORS CORP.
  1. Slide the mirror (3) onto the mirror support.
    2. NOTE: Refer to Fastener Notice .
  2. Install the set screw.

    Tighten:  Tighten the set screw to 2 N.m (18 lb in).

  3. Connect the electrical connector (4), if equipped.
  4. Install the wire cover (2), if equipped.
  5. Ensure the wire cover is tucked into the forward edge of the headliner (1).
  6. Re-calibrate the compass. Refer to Control Module References for programming and setup information.
scientia non olet · About LEMON Manuals