October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Steering Wheel Control Switch Assembly Replacement
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of GENERAL MOTORS CORP. Steering Wheel Control Switch Assembly Replacement
| Callout |
Component Name |
|
Preliminary Procedure
- Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling
.
- Remove the steering wheel. Refer to Steering Wheel Replacement
.
- Remove the horn switch. Refer to Horn Switch Replacement
.
|
| 1 |
Steering Wheel Trim Cover (Qty: 2)
Tip:
Remove the 4 horn contact screws. |
| 2 |
Steering Wheel Control Switch Assembly Screw (Qty: 4)
Tip:
- Quantity may vary with vehicle options.
- DO NOT over tighten the steering wheel control switch screws or damage to the switch(s) or steering wheel covers may occur.
|
| 3 |
Steering Wheel Control Switch Assembly (Qty: 2)
Tip:
- Quantity may vary with vehicle options.
- Make sure the steering wheel control switch(s) are properly seated to the steering wheel shroud during installation.
|