Wiper Motor Module Replacement

Fig 1: Wiper Motor Module Replacement

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Remove the air inlet panel. Refer to Air Inlet Grille Panel Replacement Disconnect the wiper motor electrical connector.
1	Bolts, Windshield Wiper Transmission Grommet (Qty: 2) Tighten: 10 N.m (89 lb in)
2	Module, Windshield Washer (Qty: 1) Tip: Rotate module assembly forward to remove from cowl panel.

Callout

Component Name

NOTE: Refer to Fastener Notice .

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

Bolts, Windshield Wiper Transmission Grommet (Qty: 2)

Tighten: 10 N.m (89 lb in)

Module, Windshield Washer (Qty: 1)
Tip: Rotate module assembly forward to remove from cowl panel.