LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2006 >> H3 Automatic >> Repair and Diagnosis >> Body & Frame >> Windows >> Stationary Windows >> Repair Instructions >> End Gate Window Replacement >> Removal Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal Procedure

  1. Remove the spare tire. Tire and Wheel Removal and Installation .
    2. CAUTION: If a window is cracked but still intact, crisscross the window with masking tape in order to reduce the risk of damage or personal injury.
  2. Apply a double layer of masking tape around the perimeter of the painted surfaces and the interior trim, to help prevent damage.
    3. CAUTION: Refer to Defroster Outlet Caution .
  3. Cover to protect the following parts from broken glass as necessary:

    The seats and carpeting

    4. Fig 1: Endgate Window
    GM1556640Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Glass and Sheet Metal Handling Caution in Cautions and Notices.
    IMPORTANT: Keep the cutting edge of the tool against the endgate window (1).
  4. This will allow the urethane adhesive to be separated from the endgate window (1).
    • Leave a base of urethane on the pinchweld flange.
    • The only suitable lubrication is clear water.
    • Use J 24402-A  , J 39032  or equivalent in order to remove the endgate window (1). See Special Tools .
  5. If the locator pins were damaged during removal, they must be replaced.
  6. With the aid of an assistant, use the suction cups to remove the endgate window from the opening.
scientia non olet · About LEMON Manuals