October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

Slide the multifunction turn signal switch housing over the steering column shaft.
NOTE: Notice: Refer to FASTENER NOTICE in Cautions and Notices.
Install the 2 multifunction turn signal switch housing bolts.
Tighten the bolts to 2.5 Nm (22 lb in).
Install the turn signal multifunction switch. Refer to Turn Signal Multifunction Switch Replacement .
Enable the SIR system. Refer to SIR DISABLING AND ENABLING in SIR.