Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Clutch Release Switch Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connector (4) from the clutch release switch (3).

Fig 2: View Of Clutch Release Switch & Components

Courtesy of GENERAL MOTORS CORP.

Complete the following in order to remove the clutch release switch (4) from the clutch pedal bracket (1):
1. Rotate the switch (4) counterclockwise.
2. Pull the switch (4) from the retainer (5).
3. Push the locking tabs inward to release the retainer (5).