Scan Tool Data Definitions: Outputs
- Inadvertent Power Cmd. 1
-
The scan tool displays the state of the inadvertent power battery rundown protection feature of the BCM. The scan tool displays On when all inadvertent power circuits are functioning normally.
- LF Turn/Hazard Lamp Command
-
The scan tool displays the commanded state of the left front turn/hazard lamp. The scan tool displays ON when the BCM activates the left front turn/hazard supply voltage circuit.
- LR Turn/Hazard Lamp Command
-
The scan tool displays the commanded state of the left rear turn/hazard lamp. The scan tool displays ON when the BCM activates the left rear turn/hazard supply voltage circuit.
- RF Turn/Hazard Lamp Command
-
The scan tool displays the commanded state of the right front turn/hazard lamp. The scan tool displays ON when the BCM activates the right front turn/hazard supply voltage circuit.
- RR Turn/Hazard Lamp Command
-
The scan tool displays the commanded state of the right rear turn/hazard lamp. The scan tool displays ON when the BCM activates the right rear turn/hazard supply voltage circuit.
- DRL Status
-
The scan tool displays the commanded state of the daytime running lamps (DRL). The scan tool displays ON when the BCM activates the DRL mode.
- Headlamp Relay
-
The scan tool displays the commanded state of the headlamp relay. The scan tool displays ON when the BCM grounds the headlamp relay to activate the headlamps.
- High Beam Relay Command
-
The scan tool displays the commanded state of the high beam relay. The scan tool displays On when the BCM has activated the high beam relay to illuminate the high beam headlamps.
- Park Lamps Signal
-
The scan tool displays the commanded state of the park lamp relay. The scan tool displays ON when the BCM activates the park lamp relay to illuminate the park lamps.
- Courtesy Lamp Output
-
The scan tool displays the commanded state of the BCM to activate the courtesy lamps. The scan tool displays ON when the BCM energizes the courtesy lamps supply voltage circuit to illuminate the courtesy lamps.
- Fog Lamp Relay Cmd.
-
The scan tool displays the commanded state of the fog lamp relay. The scan tool displays ON when the BCM energizes the fog lamp relay to activate the fog lamps.