Clutch Release Switch Adjustment
WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
- Rotate the clutch release switch (4) counterclockwise, allowing the retainer (5) to release.
- Pull the clutch pedal to full stop.
- While holding the clutch pedal at full stop, push the switch (4) inward fully until the switch body contacts the clutch pedal arm.
At this point the plunger in the switch (4) should be pushed in.
- Rotate the switch (4) clockwise until a "click" is heard.