LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2007 >> H3 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Negative Cable Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
    2. Fig 1: View Of Battery Negative Cable, Battery Tray & Bolt
    GM1313635Courtesy of GENERAL MOTORS CORP.
  2. Remove the bolt (3) securing the battery negative cable (1) to the battery tray (2).
    3. Fig 2: View Of Battery Tray, Battery Box & Battery Cable Harness Retainers
    GM1313637Courtesy of GENERAL MOTORS CORP.
  3. Open the battery cable harness retainer (4) at the battery tray (1).
  4. Remove the battery negative cable from the upper portion of the battery cables harness conduit.
  5. Raise and support the vehicle only high enough to access the remainder of the cable through the wheelhouse. Refer to Lifting and Jacking the Vehicle in General Information.
  6. Remove the left wheelhouse liner. Refer to Wheelhouse Liner Replacement - Front in Body Front End.
    7. Fig 3: View Of Negative Battery Cable At Engine Block
    GM1313636Courtesy of GENERAL MOTORS CORP.
  7. Remove the bolt (4) securing the battery negative cable (3) to the engine block (1).
  8. Open the battery cable harness retainer at the engine wiring harness bracket.
  9. Remove the battery negative cable (3) from the battery cables harness conduit (2).
scientia non olet · About LEMON Manuals