Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Longitudinal Accelerometer

Courtesy of GENERAL MOTORS CORP.

Install the sensor to the vehicle.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the 2 retaining nuts.
Tighten: Tighten the screws to 9 N.m (80 lb in).

Fig 2: View Of Longitudinal Accelerometer Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Install the electrical connector to the sensor.
Install the left split bench or bucket seat. Refer to Seat Replacement - Front Bucket or Seat Replacement - Split Bench in Seats.