LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2007 >> H3 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Lighting Systems) >> Repair Instructions >> License Lamp Bulb Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of License Lamp Assembly
    GM1388043Courtesy of GENERAL MOTORS CORP.
  1. Install the bulb to the lamp socket.
  2. Twist the lamp socket clockwise to install.
  3. Install the lamp assembly (1) into the bumper.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the license lamp nut (3).

    Tighten:  Tighten the nut to 2.5 N.m (22 lb in).

  5. Install the electrical connector (2).
  6. Inspect the lamp operation.
scientia non olet · About LEMON Manuals