LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2008 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Secondary And Configurable Customer Controls >> Diagnostic Information and Procedures >> DTC B1529 >> Component Testing
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Component Testing

CAUTION: Refer to SIR Caution .
  1. Ignition OFF, disconnect the harness connector at the suspect steering wheel control switch.
  2. Test for infinite resistance between the ignition terminal 3 and the signal terminal 4 with the switch in the open position.
    • If less than specified value, replace the switch.
  3. Test for less than 5,400 ohms between the signal terminal 4 and the ignition terminal 3 with the switch in the closed position.
    • If greater than the specified value, replace the steering wheel control switch.
scientia non olet · About LEMON Manuals