LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2008 >> H2 4D Utility Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Cellular, Entertainment, And Navigation) >> Repair Instructions >> Amplifier Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the amplifier with the amplifier bracket.
    2. NOTE: Refer to Fastener Notice .
  2. Install the amplifier screws.

    Tighten:  Tighten the screws to 3.4 N.m (30 lb in).

    3. Fig 1: Center Console & Center Console Bracket
    GM832810Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connectors to the amplifier.
  4. Install the center console to the center console bracket. Refer to Console Replacement .
  5. Inspect the system for proper operation.
scientia non olet · About LEMON Manuals