Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Ambient Light Sensor & I/P Top Cover

Courtesy of GENERAL MOTORS CORP.

Install the ambient light sensor to the underside of the I/P top cover, turning it 1/4 turn to secure it in place.

Fig 2: Aligning I/P & Routing Electrical Harnesses

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector to the ambient light sensor on the underside of the I/P top trim panel.

Fig 3: Upper Trim Pad

Courtesy of GENERAL MOTORS CORP.

Install the I/P panel top cover to the I/P. Refer to Instrument Panel Upper Trim Pad Replacement .