Removal Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Remove the left split bench or bucket seat. Refer to Front Seat Replacement - Bucket or Split Bench Seat Replacement .
Access the sensor through service slit provided in the carpet.

Fig 1: View Of Longitudinal Accelerometer Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Remove the electrical connector from the sensor.

Fig 2: View Of Longitudinal Accelerometer

Courtesy of GENERAL MOTORS CORP.

Remove the 2 nuts retaining the sensor to the floor panel.
Remove the sensor from the vehicle.