LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Anti-Lock Brake System And Traction Control System) >> Repair Instructions >> Brake Pressure Modulator Valve Bracket Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Insulator Bolts That Attach BPMV To Bracket
    GM1235535Courtesy of GENERAL MOTORS CORP.
  1. Install the bracket to the vehicle.
    2. NOTE: Refer to Fastener Notice .
  2. Install the 4 insulator bolts.

    Tighten:  Tighten the bolts to 10 N.m (86 lb in).

    3. Fig 2: View Of Brake Pressure Modulator Valve Nuts
    GM1234790Courtesy of GENERAL MOTORS CORP.
  3. Install the 3 nuts that attach the bracket to the left front wheelhouse.

    Tighten:  Tighten the nuts to 10 N.m (86 lb in).

  4. Install the left front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals