Removal Procedure

WARNING: This page is about a different car, the 2009 GMC Canyon and 2009 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Intake CMP Sensor Engine Wiring Harness Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the engine wiring harness electrical connector from the intake camshaft position (CMP) sensor.

Fig 2: View Of Intake Camshaft Sensor

Courtesy of GENERAL MOTORS CORP.

Remove the intake CMP sensor retaining bolt.
Remove the intake CMP sensor from the cylinder head.