Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Canyon and 2009 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Ignition Coils & Spark Plug Wires

Courtesy of GENERAL MOTORS CORP.

Install the ignition coil.

Fig 2: View Of Ignition Coil Mounting Bolts

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution .

Install the ignition coil bolts.
Tighten: Tighten the bolts to 8 N.m (71 lb in).

Fig 3: View of Ignition Coil Harness Connector

Courtesy of GENERAL MOTORS CORP.

Connect the ignition coil electrical connector.

Fig 4: View Of Spark Plug Wires At Ignition Coil

Courtesy of GENERAL MOTORS CORP.

Connect the spark plug wire to the ignition coil.
Install the intake manifold cover. Refer to Upper Intake Manifold Sight Shield Replacement .