Removal Procedure
WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
- Disable the SIR system. Refer to SIR Disabling and Enabling .
- Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
- Disconnect the automatic transmission shift lock control actuator electrical connector.
- Put the shift lever clevis into the neutral position.
- Use a small screwdriver to pry the automatic transmission shift lock control actuator away from the steering column jacket and the cable shift cam assembly.
- Remove the automatic transmission shift lock control actuator.
CAUTION:
Refer to SIR Caution
.