Installation Procedure

WARNING: This page is about a different car, the 2009 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of ECT Sensor

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution .

Install the coolant temperature sensor and tighten to 22 N.m (16 lb ft).
Install the coolant temperature sensor electrical connector.

Fig 2: View Of Electrical Connector Heat Protector

Courtesy of GENERAL MOTORS CORP.

Slide the electrical connector heat protector (1) onto the electrical connector.
Inspect and fill the cooling system as necessary. Refer to Cooling System Draining and Filling (GE 47716) or Cooling System Draining and Filling (Static Fill) .