LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Cruise Control System) >> Repair Instructions >> Cruise Control Release Switch Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Cruise Release Switch
    GM1302096Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector from the cruise release switch.
  2. Complete the following in order to remove the cruise release switch from the brake pedal bracket:
    1. Rotate the switch counter clockwise.
    2. Pull the switch from the retainer.
    3. Push the locking tabs inward to release the retainer.
scientia non olet · About LEMON Manuals