Multifunction Turn Signal Switch Housing Replacement

Multifunction Turn Signal Switch Housing Replacement

Removal Procedure

1. Remove the turn signal multifunction switch. Refer to Turn Signal Multifunction Switch Replacement (Turn Signal Multifunction Switch Replacement) .




2. Remove the multifunction turn signal switch housing bolts.
3. Remove the multifunction turn signal switch housing.



Installation Procedure





1. Install the multifunction turn signal switch housing.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the multifunction turn signal switch housing bolts.

Tighten the bolts to 2.5 N.m (22 lb in).

3. Install the turn signal multifunction switch. Refer to Turn Signal Multifunction Switch Replacement (Turn Signal Multifunction Switch Replacement) .