LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2009 >> H3 Alpha >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Front Drive Axle) >> Repair Instructions >> Front Axle Lubricant Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Drive Axle Lubricant Drain Plug
    GM834237Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the drain plug.

    Tighten:  Tighten the drain plug to 33 N.m (24 lb ft).

  2. Fill the differential carrier assembly with axle lubricant. Use the correct fluid. Refer to Approximate Fluid Capacities . Adhesives, Fluids, Lubricants, and Sealers .
  3. Install the fill plug.

    Tighten:  Tighten the fill plug to 33 N.m (24 lb ft).

  4. Install the front differential carrier shield, if equipped. Refer to Shield Replacement .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals