LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2009 >> H3 Base, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls And Fuel - 3.7L - DTC P0324 To DTC P0446 >> DTC P0442 >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

IMPORTANT:
  • Larger volume fuel tanks and/or those with lower fuel levels may require several minutes for the floating indicator to stabilize.
  • Refer to J 41413-200  operation manual for detailed instructions in Evaporative Emission System Diagnosis .
  1. Disconnect the purge tube at the quick connector on the EVAP canister side of the purge solenoid valve and install the CH-48096  . Connect the J 41413-200  to the CH-48096  . See Special Tools .
  2. Use a scan tool to seal the system.
  3. Use the flow meter on the J 41413-200  calibrated to 0. See Special Tools .51 mm (0.020 in) to determine that there is no leak in the EVAP system.
    • If a leak is detected, use the J 41413-200  to apply smoke to the EVAP system at the service port or the filler neck until the leak is located. See Special Tools .
scientia non olet · About LEMON Manuals