LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2009 >> H3 Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.7L - Introduction >> Repair Instructions >> Secondary Air Injection Pump Inlet Hose Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Secondary Air Injection (AIR) Pump Inlet Hose
    GM1969060Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the secondary air injection (AIR) pump inlet hose (1) quick connect fitting from the air cleaner assembly. Refer to Plastic Collar Quick Connect Fitting Service .
    2. Fig 2: Removing/Installing Air Injection (AIR) Pump Inlet & Outlet Hoses
    GM1749357Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the AIR pump inlet hose quick connect fitting (1) from the AIR pump. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Remove the AIR pump inlet hose from the vehicle.
scientia non olet · About LEMON Manuals